- Ideal for commercial and industrial applications
- Anti-crushing safety
- As the gearmotor is non reversing, no electric locks need to be installed
- In the event of power failure, the key-operated release device makes it possible to open and close the gate manually
- Twin-disk clutch in oil-bath
- Inductive or magnetic limit switch (according to model)
The package 844 ER Z16, designed for on-rack applications, includes: a gearmotor with pinion and control board 780D, limit switch magnets, release key, screw cover.
The package 844 R, designed for on-rack applications, includes: a gearmotor without pinion and without control board, limit magnets, release key, screw cover.
The package 844 R CAT, designed for on-chain applications, includes: a gearmotor without pinion and without control board, limit plates for mechanical assembly, release key, screw cover.
The package 844 R RF, designed for on-chain applications, includes: a gearmotor with idle transmissions without pinion and without control board, Limit plates for mechanical assembly, release key, screw cover.
| # | SPECIFICATIONS |
|---|---|
| Power supply voltage | 230 Vac (+6% -10%) 50 (60) Hz |
| Absorbed power | 650 W |
| Absorbed current | 3.5 A |
| Traction and thrust force | 0-110 daN (Z16) |
| Motor rotation speed | 1400 r.p.m. |
| Thermal protection on motor winding | 120 °C |
| Reduction ratio | 1:30 |
| Gate speed | 9.5 m/min (Z16) |
| Operating ambient temperature | -20 °C to +55 °C |
| Weight with oil | 14.5 kg |
| Protection class | IP 44 |
| Type of oil | FAAC HP OIL |
| Electric motor | Single-phase, bi-directional |
| Limit switch | Magnetic / Inductive |
| Clutch | Twin-disk in oil-bath |
| Dimensions (L x D x H) in mm | 275 x 191 x 387 |